DigiPlus stock

List of the catalogue of this article:

• 1,DigiPlus stock What are the judgment methods for the broken half-axle of a car?
• 2, The role of the semi-axis< /Li>
• 3. What is the half-axle of a car

What are the judgment methods for the broken half-axle of a car?

1. The specific phenomena and suggestions are as follows: the deformation of the car's half-axle will produce abnormal noise and bumps when driving, but it cannot be driven while driving, and the car will run deviate and violently shake. The deformation of the car's semi-axle will lead to eccentric wear of the tire for a long time. The half-shaft, also known as the drive shaft, is the shaft that connects the differential and the drive wheel.

2. First of all, carefully check the connection of the semi-axis to see if there is any looseness.Secondly, carry out a rotation test on the semi-axis to check whether there is any lag or not smoothness. In addition, it is necessary to check the key parts on the semi-shaft, such as CV joints and bearings, to ensure that they are not damaged or worn.

3. The performance of a broken half-axle of a car is: there will be the sound of metal rubbing or the sound of metal hitting hard. There will be a strange sound when the steering wheel is turned to the left or right. The car will shake violently when driving at high speed. The vehicle may cause the wheels to fall off when driving at high speed.

4. The semi-axle deformation of the car makes a strange sound and bumpy when it is light, and it can't be driven if it's heavy, and the car will run deviate and shake violently. The semi-axle deformation of the car will cause the tire to be worn over time. The half-shaft, also known as the drive shaft, is the shaft that connects the differential to the drive wheel.

5, the phenomenon of semi-axle damage. When the vehicle is driving, you will hear the sound of metal friction and metal collision. When the steering wheel is full on the left and right, it will make a strange sound. The vehicle will shake violently and be accompanied by shaking at high speeds. The semi-axis bends and deforms, resulting in partial wear of the tire.

6. There is an abnormal noise when driving. If the half-axle of the car is too damaged, the sound of metal material rubbing and metal material impact will occur when the vehicle is driving, which will become more and more obvious when cornering; the vehicle will run in the direction.

The role of the semi-axis

1. The semi-axis usually refers to the long semi-axis of the elliptical orbit, which is the description line.An important parameter of the orbital size of stars or other celestial bodies, the specific functions are as follows: Describe the size of the orbit: the semi-axis is used to describe the size of the celestial orbit, which is half of the long axis of the orbit. The larger the orbit, the wider the orbit, and the larger the orbital period.

2. The function of the semi-axle is to transmit the power from the differential to the drive wheel. Due to the large torque transmitted by the semi-axis, it is often made into a solid shaft. If the semi-axle is broken, the car will not be able to start and run.

3. The main function of the semi-axis is to transmit power. The half-shaft transmits the torque transmitted by the differential to the wheels to drive the car through this transmission method. Nowadays, cars use the form of semi-axle support. The most common ones are full-float half-axle and semi-float half-axle, and full-floating is the most widely used.

What is the half-axle of the car

1. The half-axle of the car generally refers to the drive bridge. The drive bridge is connected to two semi-axles. The drive bridge is a mechanism located at the end of the transmission system, which can change the speed and torque from the transmission and transmit them to the drive wheel.

2. The semi-axle of a car, also known as the drive shaft, is the shaft that connects the differential to the drive wheel. The half-shaft is the shaft that transmits torque between the gearbox reducer and the drive wheel. There is a universal joint (u/joint) at the inner and outer ends of its connected to the reducer gear and the inner ring of the hub bearing through the spline on the universal joint respectively.

3. The semi-axle of the automobile refers to the drive axle. The dynamic bridge should bear the vertical force, longitudinal force and transverse force between the road surface and the frame or body, as well as the cruptive torque and reaction force.

4. The function of the automobile semi-axle is used for the vertical force, longitudinal force and transverse force, as well as the restraint moment and reaction force between the road surface and the frame or body. The car half-shaft is a mechanism located at the end of the transmission system that can change the speed and torque from the transmission and transmit them to the drive wheel.

5. Drive. The half-shaft is an important part of the rear axle assembly of the automobile. Its inner end is connected to the differential semi-shaft gear through the spline, and the outer end is connected to the hub, which is to transmit power. The torque of the car engine is transmitted to the rear axle of the car through the car's drive shaft, and the power is transmitted from the half-axle to the wheels and tires, thus driving the car.