Bingo Plus stock

List of catalogs of this article:

• 1、greencar seat width
• 2,Bingo Plus stock How to adjust the car seat in the most comfortable way?
• 3,Business car seat sorting
• 4, What parts are the car seats divided into

greencar seat width

(Image source: greencarcongress) According to the agreement, Infinitum Electric will use oil cooling technology to verify the performance of its IEM series motors, and then design a special motor for the hybrid auxiliary power system for higher Effective hybrid car.

greencar seat width: between 400-500mm. The national standard GB 3326-1997 stipulates that the seat height H is 400-440mm, and the size difference is 10mm. The maximum height of the soft seat surface is 460mm (excluding the amount of sinking the seat surface).

What is the most comfortable way to adjust the car seat?

In order to get the most comfortable driving posture, the driver can adjust the front and rear position of the seat: usually use the adjustment lever in front of the seat, pull the adjustment lever to loosen the locking device, use the strength of the body to drive the seat to slide back and forth to the desired position, lower the adjustment lever, and fix the lock block. 2.

Adjust the angle of the seat backrest, so that the seat backrest supports the waist, and do not let the waist hang when leaning back, so as to reduce fatigue during driving. The adjustment method is: rotate the adjustment button on the left side of the seat to adjust it according to your figure, tilting up to 1 to 2 sections.

With the adjustment of the steering wheel, comfort 1 can be finally determined. Strictly control the speed, which is the fundamental measure to ensure the safety of driving at night. Pass throughThe traffic on the road at night is small, and there are fewer interference pages for pedestrians and bicycles. Generally, it is easier to drive at high speed, so traffic accidents are likely to occur.

Seat height adjustment. The height of the seat affects the driver's vision. The specific adjustment is based on the premise that it does not affect the front view, left and right vision and observation of the rearview mirror, and then adjust it to the appropriate height according to your height. The front and rear adjustment of the seat.

Business car seat sorting

When a full-time driver drives a 3-row 7-seater car, the order of the remaining 6 seats in the car (plus two seats in the middle row of folding chairs) should be in order from superior to inferiority: right seat in the back row, Left seat in the back row, middle seat in the back row, right seat in the middle row, left seat in the middle row, co-driver's seat.

Etiquette arrangement of business cars with three rows and seven seats: the next row is the main seat, and the middle row is the second seat. The seats of the most important people are also different depending on the driver.

The following are some common seating arrangements: Arrange the driver's seat: The driver is usually driven by the seven-seater business car, so the driver's seat is fixed and does not need to be arranged. Arrange front-row seats: In the front-row seats, you can distinguish them according to the leadership position and status.

The best seat for a business car is on the right side of the rear row. In business etiquette training, the right seat in the back row is the standard seat for leaders. Above each row of seats, attention is paid to "right high and left low", that is, the superiority and inferiority of the seat should be reduced from right to left. It can be summarized as from front to back and from right to left.

How many seats are there in a business car? Let's take a look at the editor's sharing. Generally, there are six seats and seven seats. The more common ones are seven seats, and some models also have five seats.

Business cars usually adopt a seven-seat layout, so there are seven seats. Seven-seat business cars are the standard configuration of MPV models in the Chinese automobile market, and usually adopt a 2+2+3 layout.

What are the parts of the car seats?Most

cars are classified according to the function of seat use, which can be divided into three types: driver's seat, passenger seat and child seat. Common seat functions include seat memory, seat heating, seat ventilation and seat massage. Seat heating refers to the electric heating device in the seat. It usually appears in vehicles with leather seats.

The structure of car seats is mostly composite, which consists of three major parts: skeleton, filling layer and epidermis.

The seat is composed of a skeleton, seat cushion, backrest and adjustment mechanism, etc. The seat cushion and backrest should have a certain elasticity. The adjustment mechanism can move the seat back and forth or up and down and adjust the inclination angle of the seat cushion and backrest.

Most child seats are placed on the in-car seats and fixed with cross-body shoulder straps (sometimes only a belt).However, different models of cars have different seats, seat belts and fixing methods.